CGAL 6.0 - CGAL and the Boost Graph Library
Loading...
Searching...
No Matches

I/O Functions for the STereoLithography (STL) File Format.

Functions

template<typename Graph , typename NamedParameters = CGAL::parameters::Default_named_parameters>
bool CGAL::IO::read_STL (std::istream &is, Graph &g, const NamedParameters &np)
 reads the graph g from the input stream, using the STereoLithography (STL) File Format.
 
template<typename Graph , typename NamedParameters = CGAL::parameters::Default_named_parameters>
bool CGAL::IO::read_STL (const std::string &fname, Graph &g, const NamedParameters &np=parameters::default_values())
 reads the graph g from the file fname, using the STereoLithography (STL) File Format.
 
template<typename Graph , typename NamedParameters = CGAL::parameters::Default_named_parameters>
bool CGAL::IO::write_STL (std::ostream &os, const Graph &g, const NamedParameters &np=parameters::default_values())
 writes the graph g in the output stream os, using the STereoLithography (STL) File Format.
 
template<typename Graph , typename NamedParameters = CGAL::parameters::Default_named_parameters>
bool CGAL::IO::write_STL (const std::string &fname, const Graph &g, const NamedParameters &np=parameters::default_values())
 writes the graph g into a file named fname, using the STereoLithography (STL) File Format.
 

Function Documentation

◆ read_STL() [1/2]

template<typename Graph , typename NamedParameters = CGAL::parameters::Default_named_parameters>
bool CGAL::IO::read_STL ( const std::string &  fname,
Graph &  g,
const NamedParameters &  np = parameters::default_values() 
)

#include <CGAL/boost/graph/IO/STL.h>

reads the graph g from the file fname, using the STereoLithography (STL) File Format.

The data is expected to represent a 2-manifold (possibly with borders). If use_binary_mode is true, but the reading fails, ASCII reading will be automatically tested.

Attention
The graph g is not cleared, and the data from the file are appended.
Template Parameters
Grapha model of MutableFaceGraph
NamedParametersa sequence of Named Parameters
Parameters
fnamethe name of the input file
gthe graph to be built from the input data
npoptional Named Parameters described below
Optional Named Parameters
  • indicates whether data should be read in binary (true) or in ASCII (false)
  • Type: Boolean
  • Default: true

  • a property map associating points to the vertices of g
  • Type: a class model of WritablePropertyMap with boost::graph_traits<Graph>::vertex_descriptor as key type and Point_3 as value type
  • Default: boost::get(CGAL::vertex_point, g)
  • Extra: If this parameter is omitted, an internal property map for CGAL::vertex_point_t must be available in Graph.

  • whether extra information is printed when an incident occurs during reading
  • Type: Boolean
  • Default: false
Returns
true if reading was successful and the resulting mesh is valid, false otherwise.
See also
Overloads of this function for specific models of the concept FaceGraph.

◆ read_STL() [2/2]

template<typename Graph , typename NamedParameters = CGAL::parameters::Default_named_parameters>
bool CGAL::IO::read_STL ( std::istream &  is,
Graph &  g,
const NamedParameters &  np 
)

#include <CGAL/boost/graph/IO/STL.h>

reads the graph g from the input stream, using the STereoLithography (STL) File Format.

The data is expected to represent a 2-manifold (possibly with borders).

Attention
The graph g is not cleared, and the data from the stream are appended.
To read a binary file, the flag std::ios::binary must be set during the creation of the ifstream.
Template Parameters
Grapha model of MutableFaceGraph
NamedParametersa sequence of Named Parameters
Parameters
isthe input stream
gthe graph to be built from the input data
npoptional Named Parameters described below
Optional Named Parameters
  • a property map associating points to the vertices of g
  • Type: a class model of WritablePropertyMap with boost::graph_traits<Graph>::vertex_descriptor as key type and Point_3 as value type
  • Default: boost::get(CGAL::vertex_point, g)
  • Extra: If this parameter is omitted, an internal property map for CGAL::vertex_point_t must be available in Graph.

  • whether extra information is printed when an incident occurs during reading
  • Type: Boolean
  • Default: false
Returns
true if reading was successful and the resulting mesh is valid, false otherwise.
See also
Overloads of this function for specific models of the concept FaceGraph.

◆ write_STL() [1/2]

template<typename Graph , typename NamedParameters = CGAL::parameters::Default_named_parameters>
bool CGAL::IO::write_STL ( const std::string &  fname,
const Graph &  g,
const NamedParameters &  np = parameters::default_values() 
)

#include <CGAL/boost/graph/IO/STL.h>

writes the graph g into a file named fname, using the STereoLithography (STL) File Format.

Template Parameters
Grapha model of FaceListGraph and HalfedgeListGraph
NamedParametersa sequence of Named Parameters
Parameters
fnamethe name of the output stream
gthe graph to be written
npoptional Named Parameters described below
Optional Named Parameters
  • indicates whether data should be written in binary (true) or in ASCII (false)
  • Type: Boolean
  • Default: true

  • a property map associating points to the vertices of g
  • Type: a class model of WritablePropertyMap with boost::graph_traits<Graph>::vertex_descriptor as key type and Point_3 as value type
  • Default: boost::get(CGAL::vertex_point, g)
  • Extra: If this parameter is omitted, an internal property map for CGAL::vertex_point_t must be available in Graph.

  • a parameter used to set the precision (i.e. how many digits are generated) of the output stream
  • Type: int
  • Default: 6
  • Extra: This parameter is only meaningful while using ASCII encoding.
Precondition
The graph must contain only triangle faces.
Returns
true if writing was successful, false otherwise.
See also
Overloads of this function for specific models of the concept FaceGraph.

◆ write_STL() [2/2]

template<typename Graph , typename NamedParameters = CGAL::parameters::Default_named_parameters>
bool CGAL::IO::write_STL ( std::ostream &  os,
const Graph &  g,
const NamedParameters &  np = parameters::default_values() 
)

#include <CGAL/boost/graph/IO/STL.h>

writes the graph g in the output stream os, using the STereoLithography (STL) File Format.

Attention
To write to a binary file, the flag std::ios::binary must be set during the creation of the ofstream, and the IO::Mode of the stream must be set to BINARY.
Template Parameters
Grapha model of FaceListGraph and HalfedgeListGraph
NamedParametersa sequence of Named Parameters
Parameters
osthe output stream
gthe graph to be written
npoptional Named Parameters described below
Optional Named Parameters
  • a property map associating points to the vertices of g
  • Type: a class model of ReadablePropertyMap with boost::graph_traits<Graph>::vertex_descriptor as key type and Point_3 as value type
  • Default: boost::get(CGAL::vertex_point, g)
  • Extra: If this parameter is omitted, an internal property map for CGAL::vertex_point_t must be available in Graph.

  • a parameter used to set the precision (i.e. how many digits are generated) of the output stream
  • Type: int
  • Default: the precision of the stream os
  • Extra: This parameter is only meaningful while using ASCII encoding.
Precondition
The graph must contain only triangle faces.
Returns
true if writing was successful, false otherwise.